老師簡介

王環江  副教授

研究方向:

1◕▩、煤經合成氣轉化的一碳化學與工程;

2◕▩、煤轉化利用中的環境化學與工程;

2014年7月畢業於中國科學院蘭州化學物理研究所☁▩•，物理化學專業☁▩•，獲理博十學位主持省級基金專案1項☁▩•，教育廳專案1項☁▩•，發表學術論文10餘篇₪✘₪◕。

論文簡介

王環江副教授的論文《Alloying lron into Palladium Nanoparticles for anEfficient Catalyst in Acetylene Dicarbonylation》在《Nanomaterials》上發表王環江副教授在實驗中所用YZPR-50由巖徵儀器提供☁▩•，論文中也特別提到上海巖徵實驗儀器有限公司☁▩•，在此非常感謝教授對巖徵儀器的選擇和認可₪✘₪◕。巖徵儀器將助力科研工作者加速取得更加輝煌的成就!

論文中區域性圖表引用◕▩│☁：

實驗中所使用的巖徵產品

2.5. Catalyst Eualuation

Typically, the methanol (20.0 mL) and catalyst (10 mg) were placed into the 50 mL autoclave (Yanzheng Instrument Ltd., Shanghai, China). After sealing the reactor, it was loaded with 11 mmol of acetylene, a certain amount of CO, and dry air (total pressure of 4.0 Mpa) in sequence. Then, the mixture was stirred (500 rpm) for 15 min, followed by heating to the target temperature and was then kept for several hours. When the reaction was complete, the autoclave was depressurized once it had cooled to room temperature. Before workup, the solid catalyst was separated by centrifugation, and 30 mg of internal standard methyl benzoate was added into the liquid products. Finally, a gas chromatograph (Agilent GC 6890N, Agilent Technologies Co., Ltd., Santa Clara, CA, USA) equipped with a flame ionization detector (FID) and a J&W 1701 (30.0 m × 250 µm × 0.25 µm) capillary column was used to quantitatively analyze the mixture solutions.